Mechanical values and environment | |
---|---|
Housing material | Reinforced plastic{} die-cast zinc nickel-plated, stainless steel |
Weight | |
Net | 0,75 kg |
Ambient temperature | |
At UB = 24V DC | -20 ... 55 °C |
Degree of protection | IP65 |
Mechanical life | |
1 x 106 | |
In case of use as door stop, and 1 Joule impact energy | 0,1 x 106 |
Installation position | Door hinge DIN left |
Switching frequency | 0,25 Hz |
Connection | |
Plug connector SFF5 X7 | |
Cable entries M20x1.5 | |
Guard locking principle | Closed-circuit current principle |
Locking force FZh | 2000 N |
Electrical connection ratings | |
Utilization category according to EN 60947-5-2 | |
DC-13 | 24V 200mA Caution: outputs must be protected with a free-wheeling diode in case of inductive loads. |
Rated insulation voltage Ui | 30 V |
Rated impulse withstand voltage Uimp | 1,5 kV |
Degree of contamination (external, according to EN 60947-1) | 3 |
Connection cross-section | |
(Rigid/flexible) | 0,13 ... 1,5 mm? |
(Rigid/flexible) with cable end sleeve according to DIN 46 228/1 | 0,25 ... 1,5 mm? |
(Rigid/flexible) with cable end sleeve with collar according to DIN 46 228/1 | 0,25 ... 0,75 mm? |
Safety class | III |
Discrepancy time | |
Between FO1A and FO1B | max.10 ms |
Risk time according to EN 60947-5-3 | max.350 ms |
Transponder coding | Unicode |
Power supply UB | |
Operating voltage DC | |
UB | 24 V DC -15% ... 10% (Reverse polarity protected, regulated, residual ripple <5%,> |
Current consumption | |
IUB | max.80 mA (no load on outputs) |
Power supply UA | |
Operating voltage DC | |
UA | 24 V DC -15% ... 10% (Reverse polarity protected, regulated, residual ripple <5%,> |
Current consumption | |
IUA | max.375 mA (With energized guard locking solenoid and unloaded outputs OD, OT, OL, OI, +20 °C, 24V) |
Safety outputs FO1A, FO1B | |
Test pulses | max.0,3 ms |
Test-pulse interval | min.100 ms |
Type of output | Semiconductor outputs, p-switching, short circuit-proof |
Output voltage | |
UFO1A /UFO1B HIGH | UB-2V ... UB V DC Value at a switching current of 50mA without taking into account the cable lengths |
UFO1A /UFO1B LOW | 0 ... 1 V DC |
Output current | |
Per safety output FO1A / FO1B | 1 ... 200 mA |
Monitoring outputs OD, OT, OL, OI | |
Type of output | Semiconductor outputs, p-switching, short circuit-proof |
Output voltage | UA-2V ... UA<span class="ph</td> |