Nominal voltage | |
---|---|
Specific value | 24 VDC |
Limit values, min/max | 12/30 VDC |
Nominal current, typically | |
Specific value | 80 mA |
Condition | unloaded |
Supply | |
In case of UL / CSA approval | according to NEC Class 2 |
Device design | |
Type | Single-/Multi-Turn |
Total resolution | <= 24 Bit |
Number of steps per revolution | <= 4096 |
Number of revolutions | <= 4096 |
Accuracy | ± 1.0 ° |
Analog - Interface | |
Voltage/Current | programmable |
Resolution | 12 Bit D/A converter |
Voltage output | -10…+10 VDC |
Load resistance (U) | >= 1 kOhm |
Current output | 0…24 mA |
Load resistance (I) | <= 500 Ohm |
Cycle time | 500 µs |
Parameter/Function, changeable | Resolution |
Analog Voltage/Current | |
Preset parameter | |
Counting direction | |
Type of parametrization | programmable |
Programming - Tool | TR-Soft: TRWinProg |
External inputs | |
F/R | Count direction |
Preset | electronic adjustment |
Logic level | "0“ < +2V, "1“ = Supply |
Maximum Speed, mechanically | <= 12000 1/min |
Shaft load, axial/radial | <= 50 N, <= 100 N |
Bearing life time | >= 3.9E+10 revolutions |
Bearing life time - Parameter | |
Speed | 6000 1/min |
Operating temperature | 60 °C |
Shaft load, axial/radial | = 60 % |
Point of origin, shaft load | Mounting flange + 10 mm |
Shaft type | |
Shaft diameter [mm] | 6 |
Shaft diameter [mm] | 8 |
Shaft diameter [mm] | 10 |
Shaft diameter [mm] | 12 |
Shaft diameter ["] | 3/8 |
Angular acceleration | <= 10E+4 rad/s² |
Moment of inertia, typically | 1.3E-6 kg m² |
Start-up torque, 20 °C | 2 Ncm |
Mass, typically | 0.3 kg |
8 (029) 555-8-000 | |
8 (044) 555-8-000 | |
8 (017) 255-8-000 |